Hawk-industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 Manuel d'utilisateur télécharger pdf (Page 46)

Lubricant Required

Chevron Pinion Grease Spray

(Part # MS-SP), 7/16" wrench

Spinner Maintenance

1. Connect the air and hydraulic

power units to the HawkJaw. See

Operation, p. 14.

2. Use the 7/16" wrench to remove

the rubber Safety shield bolts (B).

3. Remove rubber Safety shield (S).

4. While spinning after break out, from

the back of the spinner, apply

spray to chain.

5. Replace rubber Safety shield (S).

6. Use the 7/16" wrench to replace the

rubber Safety shield bolts (B).

Grease Once per Week

Chain

WARNING

Run spinner only when gripped on a

pipe body.

WARNING

Never under any conditions apply

weight materials or any other dry

materials to the chain.

NOTE

The middle or bottom Grip button must be pushed in

before the Spinner will operate.

46 Maintenance & Repair

WARNING

Keep hands away from the main drive sprocket while

spraying the chain.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 138 139

Pas de commentaire

Hawk-industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 Manuel d'utilisateur Page 46